There are always small mistakes of this kind in our daily production and life, and uv printers are no exception. As a mechanical device, it can work longer than humans, but it also has mistakes. This is not the case of uv printers. , but this kind of small mistake will have many factors, such as human-induced, or the aging of the machine, we will solve the problem when we encounter problems, and we must not shirk our responsibility. Let’s understand the small mistakes of the uv printer.
In the printing production of uv printers, there will be errors in image quality production due to factors such as nozzle failure, media placement, and height adjustment. picture quality. The printed material must be placed flat, which is much better for equipment with a suction device. Of course, another reason is that the printing material is too transparent or too thick. At this time, the printing material needs to be reloaded to ensure a smooth surface, and the opaque printing material must be replaced at the same time.
There are occasional drops of ink during the printing process of the uv printer. This is usually because the filter in the air filter on the sub-ink tank is wet, resulting in poor ventilation.
This situation may also be caused by dirt such as fine hairs and dust on the nozzle of the uv printer. When the dirt accumulates to a certain extent, the ejected ink will automatically drip. To solve this kind of problem, the air filter needs to be replaced, and the nozzle needs to be cleaned with a special cleaning solution, and a detailed inspection should be done on the two edges of the light box cloth to see if there are any extra burrs. If there are burrs, you can Simply dispose of it with a lighter.
After the uv printer transmits the print data, its indicator light will keep flashing, even if the start button is pressed, the uv printer still cannot print. This is also a common print production failure that is difficult for inexperienced operators to deal with.
It should be noted that if the uv printer terminates the printing operation incorrectly during the printing process, even if the printing work is stopped, there will still be some residual printing data sent to the uv printer on the computer side, and these will still be retained in its memory. Print data, but in the view of uv printer, these data are invalid, so the printing work cannot be realized, and it will also cause the subsequent printing work to be unable to proceed normally.
Post time: Dec-22-2022