There are three main misunderstandings about the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales outlets only refers to the theoretical speed, and a small number of professionals will mention the speed in different modes, but these are not the actual production speed. The gap between them is at least in times are calculated.
Theoretical speed of UV flatbed printer:
The theoretical speed of the UV flatbed printer refers to the printing speed that the device can achieve in the extreme mode, regardless of the accuracy, regardless of manual loading and unloading, and it can only be barely realized in a special printing mode. For example, a maximum of dozens of square meters can be made in one hour, which is impossible.
Speed of UV flatbed printer in different modes:
The speed of the printer in different modes is the speed of the several-pass printing mode, which is actually inaccurate. Although the larger the pass value, the slower the speed, but the influencing factors include the amount of feathering, one-way and two-way, loading and unloading, and wiping the coating. Or alcohol and other time, it is basically impossible to achieve in actual printing.
The actual printing speed of UV flatbed printer:
The actual printing speed of the uv flatbed printer is the printing speed that takes into account the accuracy, manual loading and unloading, and wiping alcohol or coating in the actual production process.
Speed calculation formula: theoretical speed/2=printing speed in production mode/2=actual printing speed.
Factors affecting the actual printing speed of uv flatbed printer:
1. Pre-press treatment process: some materials need to be wiped before printing, some need to be flame treated, some need to be wiped with alcohol, etc. These will affect the actual printing speed of the uv flatbed printer, and these cannot be ignored.
2. The stability of the machine and the technical level of the personnel: the former is mainly controlled by the manufacturer, and there is a big gap between different manufacturers. Some cheap UV flatbed printers have a minor repair in three days and a major repair in five days. Some 2-3 months maintenance is enough. The technical level of personnel: drawing efficiency, software operation efficiency, etc. It is recommended to choose skilled technicians, so that the scrap rate will be greatly reduced.
Improve the actual printing speed of uv flatbed printer:
1. Select a larger format equipment, so that when the UV flatbed printer prints the full part, the processing of the latter material is carried out synchronously. In this way, when the material in the latter part is printed, the material in the front part is replaced, so that the machine can print continuously.
2. Detailed operation: choose a reasonable printing mode, feathering amount setting, drawing efficiency, etc., which are greatly affected by the level of different uv flatbed printer technicians.
3.The configuration of upgrading the uv flatbed printer includes but is not limited to: increasing the speed of the print head, replacing the print head with higher performance, selecting the double-row printing mode, etc.
Post time: Aug-02-2022